Нубп справочник

У нас вы можете скачать книгу нубп справочник в fb2, txt, PDF, EPUB, doc, rtf, jar, djvu, lrf!

This example creates a Polyline with four points set to 10, , 60, , , , and , A Stroke is defined but not a Fill. Notice that the first and last points are not connected by the Stroke outline as they are in a Polygon. A Path is the most versatile Shape because you can use it to define an arbitrary geometry. But with this versatility comes complexity.

You define the geometry of a path with the Data property. There are two techniques for setting Data:. This example shows a Path that might have resulted from using Blend for Visual Studio to produce just a few vector shapes and then saving the result as XAML.

The total Path consists of a Bezier curve segment and a line segment. The example is mainly intended to give you some examples of what elements exist in the Path. Data serialization format and what the numbers represent. This Data begins with the move command, indicated by "M", which establishes an absolute start point for the path. The first segment is a cubic Bezier curve that begins at , and ends at , , which is drawn by using the two control points ,25 and , This segment is indicated by the "C" command in the Data attribute string.

The second segment begins with an absolute horizontal line command "H", which specifies a line drawn from the preceding subpath endpoint , to a new endpoint , The next example shows a usage of the other technique we discussed: This example exercises some of the contributing geometry types that can be used as part of a PathGeometry: PathFigure and the various elements that can be a segment in PathFigure.

Using PathGeometry may be more readable than populating a Path. On the other hand, Path. Our new feedback system is built on GitHub Issues. For more information on this change, please read our blog post. Fill and Stroke for shapes For a Shape to render to the app canvas, you must associate a Brush with it. Ellipse An Ellipse is a shape with a curved perimeter. Rectangle A Rectangle is a four-sided shape with its opposite sides being equal.

Polygon A Polygon is a shape with a boundary defined by an arbitrary number of points. Point 10, ; points. Point 60, ; points.

Point , ; points. Point , ; polygon1. Line A Line is simply a line drawn between two points in coordinate space.

Add line1 ; Polyline A Polyline is similar to a Polygon in that the boundary of the shape is defined by a set of points, except the last point in a Polyline is not connected to the first point. Point , ; polyline1. Path A Path is the most versatile Shape because you can use it to define an arbitrary geometry. There are two techniques for setting Data: In this form, the Path. Data value is consuming a serialization format for graphics. Instead, you use design tools that enable you to work in a design or drawing metaphor on a surface.

You can set the Data property to a single Geometry object. This can be done in code or in XAML. That single Geometry is typically a GeometryGroup , which acts as a container that can composite multiple geometry definitions into a single object for purposes of the object model.

The most common reason for doing this is because you want to use one or more of the curves and complex shapes that can be defined as Segments values for a PathFigure , for example BezierSegment.

FromArgb , , , ; path1. Add rectangleGeometry1 ; geometryGroup1. Point 50, 50 ; pathFigureCollection1. Add pathFigure1 ; pathGeometry1. If customizing feedback UI, ensure you provide feedback that supports, and is suitable for, all input modes.

All Windows apps sport a more defined focus visual around interactable controls within the application. These new focus visuals are fully customizable as well as disableable when needed.

There are two parts to the high visibility focus visuals: The primary border is 2px thick, and runs around the outside of the secondary border. The secondary border is 1px thick and runs around the inside of the primary border. To change the thickness of either border type primary or secondary use the FocusVisualPrimaryThickness or FocusVisualSecondaryThickness , respectively:.

The margin is a property of type Thickness , and therefore the margin can be customized to appear only on certain sides of the control. The default margin is 1px away from the control bounds. You can edit this margin on a per-control basis, by changing the FocusVisualMargin property:. A negative margin will push the border away from the center of the control, and a positive margin will move the border closer to the center of the control.

To turn off focus visuals on the control entirely, simply disabled UseSystemFocusVisuals:. The thickness, margin, or whether or not the app-developer wishes to have the focus visuals at all, is determined on a per-control basis.

There are only two color properties for the focus visuals: These focus visual border colors can be changed per-control on an page level, and globally on an app-wide level:.

To change the colors on a per-control basis, just edit the focus visual properties on the desired control:. Our new feedback system is built on GitHub Issues.